UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22317
                        
                            Issued:2020-08-03
                    
                            Revised:2020-08-04
                    
                            Style
                            22317
                        
                            Multiple Conductor Cable using non-integral Jacket
                    
			Rating105 deg C, 600 Vac, Horizontal Flame, Cable Flame
		
			InsulationLabeled or complying with manufacturer's AWM Procedure having a minimum rating of 105 deg C, 600 Volts.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded EVA
		
			Diameter of round assembly under jacket in inchesMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006048
		
			1.501 - 2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring or Internal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22317	Issued:2020-08-03
			Revised:2020-08-04


Rating	105 deg C, 600 Vac, Horizontal Flame, Cable Flame

Insulation	Labeled or complying with manufacturer's AWM Procedure having a minimum rating of 105 deg C, 600 Volts.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded EVA
	Diameter of round assembly under jacket in inches	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	60	48
	1.501 - 2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring or Internal Wiring.