UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22322
                        
                            Issued:2020-09-14
                    
                            Revised:New
                    
                            Style
                            22322
                        
                            Multiple Conductor Cable using Non-Integral Jacket
                    
			Rating80 deg C, No Voltage Specified, Horizontal Flame, VW-1 Flame.
		
			ConductorMin. 40 AWG, Solid or Stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall extruded expanded PTFE jacket with THV film and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG. May employ optional PTFE tubing cores.
		
			ShieldOptional.
		
			CoveringOptional inner layer.
		
			JacketNon-Extruded, consists of Extruded Foamed PTFE with Inner Extruded THV Layer. See Table below:
		
			MateralMinimum average thickness milsMinimum thickness at any point mils
		
			PTFE21
		
			THV1211
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	80 deg C, No Voltage Specified, Horizontal Flame, VW-1 Flame.

Conductor	Min. 40 AWG, Solid or Stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall extruded expanded PTFE jacket with THV film and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG. May employ optional PTFE tubing cores.

Shield	Optional.

Covering	Optional inner layer.

Jacket	Non-Extruded, consists of Extruded Foamed PTFE with Inner Extruded THV Layer. See Table below:
	Materal	Minimum average thickness mils	Minimum thickness at any point mils
	PTFE	2	1
	THV	12	11

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.