UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22327
                        
                            Issued:2020-10-30
                    
                            Revised:2021-02-01
                    
                            Style
                            22327
                        
                            Parallel cable with extruded insulation and extruded non-integral covering
                    
			Rating80 deg C, 30 Vac.
		
			Conductor42 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded Foam PE, with minimum average thickness 5 mils and minimum thickness at any point 4 mils
		
			AssemblyThe cable consists of two insulated conductors laid parallel with an overall covering, optional shield layer, optional drain wire, and an overall optional outer covering layer.
		
			CoveringExtruded Solid PE, with minimum average thickness of 4 mils and minimum thickness at any point of 3 mils
		
			ShieldOptional Al PET or Cu PET Tape Shield with 1 mil minimum thickness at any point.
		
			CoveringOptional Outer Layer with PP Tape or PET Tape with 1.4 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing into Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22327	Issued:2020-10-30
			Revised:2021-02-01


Rating	80 deg C, 30 Vac.

Conductor	42 AWG - 20 AWG, solid or stranded.

Insulation	Extruded Foam PE, with minimum average thickness 5 mils and minimum thickness at any point 4 mils

Assembly	The cable consists of two insulated conductors laid parallel with an overall covering, optional shield layer, optional drain wire, and an overall optional outer covering layer.

Covering	Extruded Solid PE, with minimum average thickness of 4 mils and minimum thickness at any point of 3 mils

Shield	Optional Al PET or Cu PET Tape Shield with 1 mil minimum thickness at any point.

Covering	Optional Outer Layer with PP Tape or PET Tape with 1.4 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing into Cables.