UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22328
                        
                            Issued:2020-11-10
                    
                            Revised:2023-02-27
                    
                            Style
                            22328
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 3000 Vac, Horizontal Flame, Cable Flame.
		
			InsulationLabeled or complying with the manufacturer's AWM procedure. Rated for min. 80C and 3000Vac.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded FRPE
		
			Diameter of round assembly under jacket in inchesMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.700 or less3326
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22328	Issued:2020-11-10
			Revised:2023-02-27


Rating	80 deg C, 3000 Vac, Horizontal Flame, Cable Flame.

Insulation	Labeled or complying with the manufacturer's AWM procedure. Rated for min. 80C and 3000Vac.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided.

Covering	Optional.

Shield	Optional.

Jacket	Extruded FRPE
	Diameter of round assembly under jacket in inches	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.700 or less	33	26
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.