UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2233
                        
                            Issued:1959-05-01
                    
                            Revised:2011-10-19
                    
                            Style
                            2233
                        
                            Parallel cable with extruded integral insulation and jacket.
                    
			Rating105 deg C, 600 Vac, Horizontal flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			ConductorNo. 14, 12 or 10 AWG consisting of No. 30 AWG or smaller tinned or bare copper.
		
			InsulationIntegral with Jacket. Extruded PVC, 70 mils min average thickness, 63 mils minimum thikness at any point.
		
			AssemblyFour conductors, same as type SPT-3, except for a nominal 80 mil, the following minimum (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.141 in., Wall after rip 0.058 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 2233	Issued:1959-05-01
			Revised:2011-10-19


Rating	105 deg C, 600 Vac, Horizontal flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	No. 14, 12 or 10 AWG consisting of No. 30 AWG or smaller tinned or bare copper.

Insulation	Integral with Jacket. Extruded PVC, 70 mils min average thickness, 63 mils minimum thikness at any point.

Assembly	Four conductors, same as type SPT-3, except for a nominal 80 mil, the following minimum (pin gauge) dimensions: Wall thickness: 0.070 in., Web thickness: 0.141 in., Wall after rip 0.058 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring.