UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22330
                        
                            Issued:2020-11-17
                    
                            Revised:2020-12-04
                    
                            Style
                            22330
                        
                            Multi-conductor Flat Ribbon Cable with Extruded Insulation and Extruded Non-Integral Jacket
                    
			Rating75 deg C, 60 Vac, Cable Flame, VW-1 flame, HF, LSHF.
		
			ConductorNos. 30 AWG - 16 AWG, solid or stranded.
		
			InsulationExtruded PE, 5 mils minimum average thickness, 4 mils minimum thickness at any point, max average thickness 12 mils.  See Facing Page for compound.
		
			AssemblyFour insulated conductor pairs laid flat and parallel with inner Al/polyester shield, drain wire(s), Outer Al/polyester shield and overall FRPE jacket.  The minimum distance between the conductor pairs shall be 38 mils and the minimum distance between conductors shall be 14 mils.
		
			Inner ShieldAl/polyester tape shield provided over the complete conductor core - see Facing Page for tape shield designation.
		
			Outer ShieldAl/polyester tape shield provided under the overall jacket - see Facing Page for tape shield designation.
		
			JacketExtruded FRPE, 20 mils minimum average thickness, 16 mils minimum thickness at any point, max average thickness 25 mils.  See Facing Page for compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22330	Issued:2020-11-17
			Revised:2020-12-04


Rating	75 deg C, 60 Vac, Cable Flame, VW-1 flame, HF, LSHF.

Conductor	Nos. 30 AWG - 16 AWG, solid or stranded.

Insulation	Extruded PE, 5 mils minimum average thickness, 4 mils minimum thickness at any point, max average thickness 12 mils. See Facing Page for compound.

Assembly	Four insulated conductor pairs laid flat and parallel with inner Al/polyester shield, drain wire(s), Outer Al/polyester shield and overall FRPE jacket. The minimum distance between the conductor pairs shall be 38 mils and the minimum distance between conductors shall be 14 mils.

Inner Shield	Al/polyester tape shield provided over the complete conductor core - see Facing Page for tape shield designation.

Outer Shield	Al/polyester tape shield provided under the overall jacket - see Facing Page for tape shield designation.

Jacket	Extruded FRPE, 20 mils minimum average thickness, 16 mils minimum thickness at any point, max average thickness 25 mils. See Facing Page for compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.