UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2235
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-05
                    
                            Style
                            2235
                        
                            Parallel Cable with Extruded Integral Insulation and Jacket.
                    
			Rating90 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			ConductorNo. 18 or 16 AWG consisting of No. 30 AWG or smaller strands.
		
			InsulationIntegral with Jacket. Extruded PVC, 60 mils min average, 54 mils minimum at any point.
		
			AssemblyFour conductors, same as type SPT-2, except for a nominal 60 mil, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators where ripped not more than three inches.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2235	Issued:1959-05-01
			Revised:2012-07-05


Rating	90 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	No. 18 or 16 AWG consisting of No. 30 AWG or smaller strands.

Insulation	Integral with Jacket. Extruded PVC, 60 mils min average, 54 mils minimum at any point.

Assembly	Four conductors, same as type SPT-2, except for a nominal 60 mil, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.078 in., Wall after rip: 0.028 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators where ripped not more than three inches.