UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22352
                        
                            Issued:2021-03-17
                    
                            Revised:New
                    
                            Style
                            22352
                        
                            Multi-conductor cable with non-integral jacket
                    
			Rating90 deg C, 1000 Vac.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPE
		
			Diameter of core assembly under jacketMinimum average thicknessMinium thickness at any point
		
			0.700 or less inch30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.000 inch110 mils88 mils
		
			4.001 inch or larger140 mils112 mils
		
			* Major diameter if cable is flat or oval
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial. Internal Wiring without a flame rating.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	90 deg C, 1000 Vac.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPE
	Diameter of core assembly under jacket	Minimum average thickness	Minium thickness at any point
	0.700 or less inch	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.000 inch	110 mils	88 mils
	4.001 inch or larger	140 mils	112 mils
	* Major diameter if cable is flat or oval

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special. Internal Wiring without a flame rating.