UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22371
                        
                            Issued:2021-03-22
                    
                            Revised:New
                    
                            Style
                            22371
                        
                            Multiple conductor cable using non-integral jacket
                    
			Rating200 deg C, 600 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			JacketExtruded PTFE, 10 mils minimum average thickness, 8 mils minimum thickness at any point
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	200 deg C, 600 Vac, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Jacket	Extruded PTFE, 10 mils minimum average thickness, 8 mils minimum thickness at any point

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.