UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2238
                        
                            Issued:1959-05-01
                    
                            Revised:2012-07-13
                    
                            Style
                            2238
                        
                            Multiple conductor with extruded insulation.
                    
			Rating90 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			Conductor18 or 16 AWG consisting of No. 30 AWG or smaller.
		
			InsulationIntegral with Jacket. PVC, 58 mils min average.
		
			AssemblyFour conductors, same as type SPT-3, except for a nominal 60 mil, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in..
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of Electric Refrigerators or Room Cooler Units where ripped not more than 15 inches and where exposed to temperatures not exceeding 90 deg C. Tag may also add: where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C; whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2238	Issued:1959-05-01
			Revised:2012-07-13


Rating	90 deg C, 600 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	18 or 16 AWG consisting of No. 30 AWG or smaller.

Insulation	Integral with Jacket. PVC, 58 mils min average.

Assembly	Four conductors, same as type SPT-3, except for a nominal 60 mil, the following minimum (pin gauge) dimensions: Wall thickness: 0.058 in., Web thickness: 0.141 in., Wall after rip: 0.058 in..

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of Electric Refrigerators or Room Cooler Units where ripped not more than 15 inches and where exposed to temperatures not exceeding 90 deg C. Tag may also add: where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C; whichever is applicable). Polarity identification may be omitted.