UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22381
                        
                            Issued:2021-08-09
                    
                            Revised:2021-08-10
                    
                            Style
                            22381
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 1000 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together with overall jacket. Lay not specified. Barrier layer, shield, braid and/or fillers optional.
		
			ShieldOptional.
		
			JacketExtruded TPU -
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.500 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial-For use with information technology equipment where the acceptability of the combination is to be determined by Underwriters Laboratories LLC
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22381	Issued:2021-08-09
			Revised:2021-08-10


Rating	90 deg C, 1000 Vac, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles or groups of twisted singles twisted together with overall jacket. Lay not specified. Barrier layer, shield, braid and/or fillers optional.

Shield	Optional.

Jacket	Extruded TPU -
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.500 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special-For use with information technology equipment where the acceptability of the combination is to be determined by Underwriters Laboratories LLC