UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22386
                        
                            Issued:2021-08-20
                    
                            Revised:2021-08-19
                    
                            Style
                            22386
                        
                            Multiple-conductor cable employing a non-extruded covering as the outermost layer
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Insulated ConductorLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more insulated singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringInner Covering, Polypropylene film with or without polyester adhesive, one or two sheets, each sheet is 0.5 mil minimum thickness at any point.
		
			ShieldOptional.
		
			CoveringOuter Covering, Polyester film with polyester adhesive, may be applied 1 ~ 3 sheets, 0.5 mils minimum thickness at any point of total tape layers.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22386	Issued:2021-08-20
			Revised:2021-08-19


Rating	80 deg C, 30 Vac, Horizontal flame.

Insulated Conductor	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more insulated singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Inner Covering, Polypropylene film with or without polyester adhesive, one or two sheets, each sheet is 0.5 mil minimum thickness at any point.

Shield	Optional.

Covering	Outer Covering, Polyester film with polyester adhesive, may be applied 1 ~ 3 sheets, 0.5 mils minimum thickness at any point of total tape layers.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.