UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22387
                        
                            Issued:2021-08-19
                    
                            Revised:2024-04-29
                    
                            Style
                            22387
                        
                            Multiple Conductor Cable with Non-Extruded Covering
                    
			Rating80 deg C, 30 Vac, Horizontal Flame, VW-1 flame.
		
			InsulationLabeled or Complying with the Manufacturer's AWM procedure. Rated for Min. 80C, 30Vac
		
			AssemblyCable Consists of one or more labeled insulated singles and one or more labeled multiconductor components which may consist of multiconductor parallel pairs. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			Inner ShieldMetal Tape. Provided over each labeled insulated single or labeled multiconductor components.
		
			Inner CoveringOptional - Plastic Tape with max 3 mils thickness
		
			Outer CoveringOptional - Plastic Tape with max 3 mils thickness. Provided over entire core assembly.
		
			Middle ShieldMetal Tape. Provided over outer covering and under Braided Shield.
		
			Outer ShieldTinned Copper Braid. Provided over Metal Tape Shield and under outer non-extruded covering.
		
			CoveringNon-Extruded PET Braid. Each strand of PET covering is minimum 8.6 mils in diameter.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22387	Issued:2021-08-19
			Revised:2024-04-29


Rating	80 deg C, 30 Vac, Horizontal Flame, VW-1 flame.

Insulation	Labeled or Complying with the Manufacturer's AWM procedure. Rated for Min. 80C, 30Vac

Assembly	Cable Consists of one or more labeled insulated singles and one or more labeled multiconductor components which may consist of multiconductor parallel pairs. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Inner Shield	Metal Tape. Provided over each labeled insulated single or labeled multiconductor components.

Inner Covering	Optional - Plastic Tape with max 3 mils thickness

Outer Covering	Optional - Plastic Tape with max 3 mils thickness. Provided over entire core assembly.

Middle Shield	Metal Tape. Provided over outer covering and under Braided Shield.

Outer Shield	Tinned Copper Braid. Provided over Metal Tape Shield and under outer non-extruded covering.

Covering	Non-Extruded PET Braid. Each strand of PET covering is minimum 8.6 mils in diameter.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.