UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2239
                        
                            Issued:1959-05-01
                    
                            Revised:2012-04-03
                    
                            Style
                            2239
                        
                            Parallel cable with extruded integral insulation and jacket
                    
			Rating105 deg C, 600 Vac, FT-2 Flame, Optional - 60 deg C or 80 deg C Oil.
		
			Conductor18 AWG or 16 AWG, stranded consists of 30 AWG or smaller strands.
		
			Integral Insulation and JacketExtruded PVC. Same as for Type SPT-3 except for a nominal 60 mils wall and the following minimum (pin gauge) dimensions: Wall Thickness: 58 mils; Web thickness: 141 mils; Wall after rip: 58 mils
		
			AssemblyFour-conductor.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of electric refrigerators or room cooler units where ripped not more than 15 inches. Tag may also add: where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C; whichever is applicable. Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2239	Issued:1959-05-01
			Revised:2012-04-03


Rating	105 deg C, 600 Vac, FT-2 Flame, Optional - 60 deg C or 80 deg C Oil.

Conductor	18 AWG or 16 AWG, stranded consists of 30 AWG or smaller strands.

Integral Insulation and Jacket	Extruded PVC. Same as for Type SPT-3 except for a nominal 60 mils wall and the following minimum (pin gauge) dimensions: Wall Thickness: 58 mils; Web thickness: 141 mils; Wall after rip: 58 mils

Assembly	Four-conductor.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of electric refrigerators or room cooler units where ripped not more than 15 inches. Tag may also add: where exposed to oil at a temperature not exceeding 60 deg C or 80 deg C; whichever is applicable. Polarity identification may be omitted.