UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22396
                        
                            Issued:2021-11-17
                    
                            Revised:2023-07-09
                    
                            Style
                            22396
                        
                            Parallel cable with extruded insulation and extruded non-integral covering.
                    
			Rating80 deg C, 300 Vac.
		
			Conductor42 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded Solid PE or FRPE - 3.5 mils minimum average thickness, 3 mils minimum thickness at any point.
		
			AssemblyThe cable consists of two insulated conductors laid parallel with an overall covering, optional shield layer, optional drain wire, and an overall optional outer covering layer.
		
			CoveringExtruded Solid PE or FRPE - 3.5 mils minimum average thickness, 3 mils minimum thickness at any point.
		
			ShieldOptional Al PET or Cu PET Tape Shield with 1 mil minimum thickness at any point.
		
			CoveringOptional Outer Layer - PP Tape or PET Tape with 1.4 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseFor Further Processing into Cables.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22396	Issued:2021-11-17
			Revised:2023-07-09


Rating	80 deg C, 300 Vac.

Conductor	42 AWG - 20 AWG, solid or stranded.

Insulation	Extruded Solid PE or FRPE - 3.5 mils minimum average thickness, 3 mils minimum thickness at any point.

Assembly	The cable consists of two insulated conductors laid parallel with an overall covering, optional shield layer, optional drain wire, and an overall optional outer covering layer.

Covering	Extruded Solid PE or FRPE - 3.5 mils minimum average thickness, 3 mils minimum thickness at any point.

Shield	Optional Al PET or Cu PET Tape Shield with 1 mil minimum thickness at any point.

Covering	Optional Outer Layer - PP Tape or PET Tape with 1.4 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	For Further Processing into Cables.