UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22399
                        
                            Issued:2021-12-13
                    
                            Revised:New
                    
                            Style
                            22399
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating60 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG min., Solid or Stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering.
		
			CoveringOptional. Extruded FRPE or Extruded PVC, 5 mil minimum average thickness, 4 mils minimum thickness at any point. Covering over the conductor assembly.
		
			JacketExtruded FRPE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024


Rating	60 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG min., Solid or Stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional. Over one or more of the insulated conductors or between the conductor assembly and the optional covering.

Covering	Optional. Extruded FRPE or Extruded PVC, 5 mil minimum average thickness, 4 mils minimum thickness at any point. Covering over the conductor assembly.

Jacket	Extruded FRPE, 12 mils minimum average thickness, 10 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.