UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22406
                        
                            Issued:2021-12-13
                    
                            Revised:2021-12-15
                    
                            Style
                            22406
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, -40 deg C, 600 Vac, Horizontal Flame, 80C Oil
		
			Conductor50 AWG - 4 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's Procedure.
		
			AssemblyTwo or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional inner layer
		
			JacketExtruded TPU - See Facing page for Compound
		
			Diameter of Cable under jacket in milsmils min averagemils minimum at any point
		
			0.700 or less3226
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22406	Issued:2021-12-13
			Revised:2021-12-15


Rating	80 deg C, -40 deg C, 600 Vac, Horizontal Flame, 80C Oil

Conductor	50 AWG - 4 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's Procedure.

Assembly	Two or more singles, twisted pairs or groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional inner layer

Jacket	Extruded TPU - See Facing page for Compound
	Diameter of Cable under jacket in mils	mils min average	mils minimum at any point
	0.700 or less	32	26
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.