UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22410
                        
                            Issued:2021-12-22
                    
                            Revised:2021-12-21
                    
                            Style
                            22410
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C,60 V Cable flame.
		
			Conductor44 AWG - 10 AWG, solid or stranded.
		
			InsulationExtruded FEP, 2 mils minimum average thickness, 1 mils thickness at any point
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors.  The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction.  Barrier layer, tapes and/or fillers optional.  May use same or mixed AWG sizes.  Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketExtruded TPE.
		
			Diameter of core assembly under jacketminimum average thicknessMinimum thickness at any point
		
			1.500 inch or less13 mils10 mils
		
			1.501-2.500 inch15 mils12 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22410	Issued:2021-12-22
			Revised:2021-12-21


Rating	80 deg C,60 V Cable flame.

Conductor	44 AWG - 10 AWG, solid or stranded.

Insulation	Extruded FEP, 2 mils minimum average thickness, 1 mils thickness at any point

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Covering	Optional.

Jacket	Extruded TPE.
	Diameter of core assembly under jacket	minimum average thickness	Minimum thickness at any point
	1.500 inch or less	13 mils	10 mils
	1.501-2.500 inch	15 mils	12 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring in Class 2 Circuits only.