UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22417
                        
                            Issued:2022-01-18
                    
                            Revised:2022-01-19
                    
                            Style
                            22417
                        
                            Multiple Conductor Cable using Non-Integral Non-Extruded Jacket
                    
			Rating90 deg C, 300 Vac.
		
			ConductorStranded Copper, 0.1 mm2 - 2.5 mm2
		
			InsulationExtruded FEP - 4 mils minimum average thickness, 3.5 mils minimum at any point.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together to form a round cable. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Lay not specified. Barrier layer and/or fillers optional.
		
			ShieldBraided Copper, minimum 70% coverage.
		
			JacketNon-Extruded Unsintered PTFE Tape - 6 mils minimum average thickness, 5 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial. External Wiring without a flame rating for use in Cleanroom Machinery where the final use and acceptability is determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22417	Issued:2022-01-18
			Revised:2022-01-19


Rating	90 deg C, 300 Vac.

Conductor	Stranded Copper, 0.1 mm2 - 2.5 mm2

Insulation	Extruded FEP - 4 mils minimum average thickness, 3.5 mils minimum at any point.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together to form a round cable. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Lay not specified. Barrier layer and/or fillers optional.

Shield	Braided Copper, minimum 70% coverage.

Jacket	Non-Extruded Unsintered PTFE Tape - 6 mils minimum average thickness, 5 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special. External Wiring without a flame rating for use in Cleanroom Machinery where the final use and acceptability is determined by UL LLC.