UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22418
                        
                            Issued:2022-01-18
                    
                            Revised:2022-06-21
                    
                            Style
                            22418
                        
                            Multiple Conductor Cable using Non-Integral Non-Extruded Jacket.
                    
			Rating90 deg C, 600 Vac.
		
			ConductorStranded Copper, 0.1 mm2 - 4.0 mm2
		
			InsulationExtruded FEP - 14 mils minimum average thickness, 13 mils minimum thickness at any point.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together to form a round cable. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Barrier layer and or fillers are optional.
		
			ShieldBraided Copper, minimum 70% coverage.
		
			JacketNon-Extruded Unsintered PTFE Tape - 6 mils minimum average thickness, 5 mils minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial. External Wiring without a flame rating for use in Cleanroom Machinery where the final use and acceptability is determined by UL LLC.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22418	Issued:2022-01-18
			Revised:2022-06-21


Rating	90 deg C, 600 Vac.

Conductor	Stranded Copper, 0.1 mm2 - 4.0 mm2

Insulation	Extruded FEP - 14 mils minimum average thickness, 13 mils minimum thickness at any point.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together to form a round cable. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size. Barrier layer and or fillers are optional.

Shield	Braided Copper, minimum 70% coverage.

Jacket	Non-Extruded Unsintered PTFE Tape - 6 mils minimum average thickness, 5 mils minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special. External Wiring without a flame rating for use in Cleanroom Machinery where the final use and acceptability is determined by UL LLC.