UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2242
                        
                            Issued:1959-05-01
                    
                            Revised:2012-03-09
                    
                            Style
                            2242
                        
                            Parallel cable with extruded intergral insulation and jacket
                    
			Rating105 deg C, 300 Vac, FT2 flame, Optional - Oil Resistant 60 deg C or 80 deg C.
		
			ConductorNo.20 to 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.
		
			InsulationIntegral with Jacket. Extruded PVC, 45 mils mininum average thickness, 40 mils minimum thickness at any point.
		
			AssemblyTwo or three conductors, same as type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of lighting circuits in electric refrigerators; or internal wiring of lighting circuits in electric refrigerators or where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable), leads for Battery Charges or in appliance Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2242	Issued:1959-05-01
			Revised:2012-03-09


Rating	105 deg C, 300 Vac, FT2 flame, Optional - Oil Resistant 60 deg C or 80 deg C.

Conductor	No.20 to 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

Insulation	Integral with Jacket. Extruded PVC, 45 mils mininum average thickness, 40 mils minimum thickness at any point.

Assembly	Two or three conductors, same as type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of lighting circuits in electric refrigerators; or internal wiring of lighting circuits in electric refrigerators or where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C, whichever is applicable), leads for Battery Charges or in appliance Polarity identification may be omitted.