UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22420
                        
                            Issued:2022-01-28
                    
                            Revised:New
                    
                            Style
                            22420
                        
                            Multi-conductor cable using non-extruded covering
                    
			Rating60 deg C, No Voltage Specified, Horizontal Flame
		
			ConductorMin. 40 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure having a minimum rating 60C.
		
			AssemblyTwo or more groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall expanded PTFE tape jacket with inner TPU adhesive layer and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG. Construction may employ optional PTFE tubing cores.
		
			Inner CoveringOptional.
		
			ShieldOptional. May be either over the assemblies or coverings.
		
			Outer CoveringExpanded PTFE tape with Inner TPU adhesive layer.
		
			MaterialMinimum average thickness milsMinimum thickness at any point mils
		
			Expanded PTFE Tape21
		
			TPU1211
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	60 deg C, No Voltage Specified, Horizontal Flame

Conductor	Min. 40 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure having a minimum rating 60C.

Assembly	Two or more groups of conductors labeled or complying with manufacturer's AWM Procedure and having a temperature and voltage rating equaling or exceeding the rating of the cable. These groups are laid parallel with an overall expanded PTFE tape jacket with inner TPU adhesive layer and these groups are joined together by an interconnecting web. The lay of the conductors within each group is not specified. Barrier layer and/or fillers and strength members are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG. Construction may employ optional PTFE tubing cores.

Inner Covering	Optional.

Shield	Optional. May be either over the assemblies or coverings.

Outer Covering	Expanded PTFE tape with Inner TPU adhesive layer.
	Material	Minimum average thickness mils	Minimum thickness at any point mils
	Expanded PTFE Tape	2	1
	TPU	12	11

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.