|
Rating | 80 deg C,90 Vac Horizontal flame. |
|
Conductor | Solid or stranded. |
|
Insulation | Labeled or complying with the manufacturer's AWM Procedure. |
|
Assembly | Two or more individually insulated wires or groups or individually insulated wires forming a round, oval or flat cable. The length of lay of the twisted wires or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors. |
|
Shield | Optional. |
|
Jacket | TPE |
| Diameter of core assembly under jacket(inches)* | Minimum average thickness(mils) | Minimum thickness at any point(mils) |
| 0 - 4.000 | 15 | 12 |
| 0.401 - 0.700 | 30 | 24 |
| 0.701 - 1.000 | 45 | 36 |
| 1.001 - 1.500 | 60 | 48 |
| *Major diameter if cable is flat or oval. |
|
Outermost Braid | Optional. Polyester mateial. |
|
Standard | Appliance Wiring Material UL 758. |
|
Marking | General. |
|
Use | Internal Wiring. |
|