UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22427
                        
                            Issued:2022-04-28
                    
                            Revised:New
                    
                            Style
                            22427
                        
                            Multiple-Conductor Cable using Non-Integral Jacket.
                    
			Rating80 deg C, 600 V Horizontal flame.
		
			Conductor40 AWG minimum, solid or stranded round, tinned or bare.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or filler are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			FillersOptional
		
			BraidOptional
		
			ShieldOptional
		
			CoveringOptional, Extruded FRPE, 23 mils min average, 18 mils minimum at any point.
		
			Flooding CompoundOptional, Gel Flooding compound Unilite may be employed under the jacket.
		
			JacketExtruded FRPE, 23 mils min average, 18 mils minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C, 600 V Horizontal flame.

Conductor	40 AWG minimum, solid or stranded round, tinned or bare.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or filler are optional. Manufacturers shall maintain a complete description of each assembly. May use same or mixed AWG size.

Fillers	Optional

Braid	Optional

Shield	Optional

Covering	Optional, Extruded FRPE, 23 mils min average, 18 mils minimum at any point.

Flooding Compound	Optional, Gel Flooding compound Unilite may be employed under the jacket.

Jacket	Extruded FRPE, 23 mils min average, 18 mils minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.