UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            2243
                        
                            Issued:1959-05-01
                    
                            Revised:2011-09-23
                    
                            Style
                            2243
                        
                            SPT-2 Cord.
                    
			Rating105 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).
		
			ConductorNo. 20, 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.
		
			InsulationIntegral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.
		
			AssemblyThree conductor, same as type SPT-2.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal wiring of lighting circuits in electric refrigerators where exposed to temperatures not exceeding 105 deg C; or Internal wiring of lighting circuits in electric refrigerators where exposed to air at a temperature not exceeding 105 deg C or where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C; whichever is applicable). Polarity identification may be omitted.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 2243	Issued:1959-05-01
			Revised:2011-09-23


Rating	105 deg C, 300 Vac, FT2 flame, Oil Resistant 60 deg C or 80 deg C (optional).

Conductor	No. 20, 18 or 16 AWG consisting of No. 30 AWG or smaller tinned or bare copper strands.

Insulation	Integral with Jacket. PVC, 45 mils min average, 40 mils minimum at any point.

Assembly	Three conductor, same as type SPT-2.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal wiring of lighting circuits in electric refrigerators where exposed to temperatures not exceeding 105 deg C; or Internal wiring of lighting circuits in electric refrigerators where exposed to air at a temperature not exceeding 105 deg C or where exposed to oil at a temperature not exceeding (60 deg C or 80 deg C; whichever is applicable). Polarity identification may be omitted.