UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22431
                        
                            Issued:2022-05-17
                    
                            Revised:2022-05-19
                    
                            Style
                            22431
                        
                            Multiconductor cable with non-extruded covering
                    
			Rating80 deg C,30 Vac Horizontal flame.
		
			ConductorSolid or stranded.
		
			Insulated ConductorLabeled or complying with Manufacturer's AWM Procedure, The minimum voltage and temperature ratings of the singles shall be the rating of the overall cable.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Inner CoveringOptional, material and thickness not specified.
		
			ShieldOptional.
		
			Outer CoveringOne or two layers non-extruded polyester film with polyester adhesive, 0.5 mil minimum average thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22431	Issued:2022-05-17
			Revised:2022-05-19


Rating	80 deg C,30 Vac Horizontal flame.

Conductor	Solid or stranded.

Insulated Conductor	Labeled or complying with Manufacturer's AWM Procedure, The minimum voltage and temperature ratings of the singles shall be the rating of the overall cable.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Inner Covering	Optional, material and thickness not specified.

Shield	Optional.

Outer Covering	One or two layers non-extruded polyester film with polyester adhesive, 0.5 mil minimum average thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.