UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22434
                        
                            Issued:2022-05-27
                    
                            Revised:2022-05-26
                    
                            Style
                            22434
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 450 Vac.
		
			Conductor40 AWG min. solid or stranded round, tinned or bare copper.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of one or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form anoval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringInner: Optional - Foamed TPES, 23 mil minimum thickness.
		
			JacketExtruded TPES
		
			Diameter of core assembly under jacketMinimum average thicknessMinium thickness at any point
		
			0.700 or less inch23 mils21 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial. External wiring or internal wiring without a flame rating.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22434	Issued:2022-05-27
			Revised:2022-05-26


Rating	80 deg C, 450 Vac.

Conductor	40 AWG min. solid or stranded round, tinned or bare copper.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of one or more conductors or groups of conductors twisted together. The conductors or groups of conductors may be laid to form anoval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Inner: Optional - Foamed TPES, 23 mil minimum thickness.

Jacket	Extruded TPES
	Diameter of core assembly under jacket	Minimum average thickness	Minium thickness at any point
	0.700 or less inch	23 mils	21 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special. External wiring or internal wiring without a flame rating.