UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22437
                        
                            Issued:2022-07-06
                    
                            Revised:New
                    
                            Style
                            22437
                        
                            Multiple Conductor Cable with Extruded Non-integral Jacket.
                    
			Rating80 deg C, -30 deg C, 300 Vac, Horizontal Flame, 60 deg C Oil Res, Sunlight Res.
		
			Conductor32 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point. See Facing Page for Compound.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C, -30 deg C, 300 Vac, Horizontal Flame, 60 deg C Oil Res, Sunlight Res.

Conductor	32 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC, 15 mils minimum average thickness, 12 mils minimum thickness at any point. See Facing Page for Compound.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.