UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22442
                        
                            Issued:2022-09-26
                    
                            Revised:2023-07-11
                    
                            Style
                            22442
                        
                            Parallel cable with extruded insulation and extruded non-integral covering
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor50 AWG - 20 AWG, Solid or Stranded Round.
		
			InsulationExtruded FEP, with minimum average thickness 2.5 mils and minimum thickness at any point 2 mils.
		
			AssemblyThe cable consists of two insulated conductors laid parallel with an optional inner covering, optional shield layer, optional drain wire, and an overall outer covering layer.
		
			CoveringOptional Inner Layer with Extruded FEP, with minimum average thickness of 2 mils and minimum thickness at any point of 1.5 mils.
		
			ShieldOptional Al PET or Cu PET Tape Shield with 1 mil minimum thickness at any point.
		
			CoveringOuter Layer with PTFE Tape, PP Tape, or PET Tape with 0.7 mil minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22442	Issued:2022-09-26
			Revised:2023-07-11


Rating	80 deg C, 30 Vac, Horizontal Flame.

Conductor	50 AWG - 20 AWG, Solid or Stranded Round.

Insulation	Extruded FEP, with minimum average thickness 2.5 mils and minimum thickness at any point 2 mils.

Assembly	The cable consists of two insulated conductors laid parallel with an optional inner covering, optional shield layer, optional drain wire, and an overall outer covering layer.

Covering	Optional Inner Layer with Extruded FEP, with minimum average thickness of 2 mils and minimum thickness at any point of 1.5 mils.

Shield	Optional Al PET or Cu PET Tape Shield with 1 mil minimum thickness at any point.

Covering	Outer Layer with PTFE Tape, PP Tape, or PET Tape with 0.7 mil minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.