UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22449
                        
                            Issued:2022-10-24
                    
                            Revised:2022-10-23
                    
                            Style
                            22449
                        
                            Flat ribbon cable
                    
			Rating105 deg C,600 Vac Horizontal flame; Oil Res 60,80 (optional).
		
			Conductor2-150, Nos. 32-16 AWG. Tinned or bare, solid or stranded copper, conductors laid parallel and in one plane. Same or mixed AWG.
		
			InsulationExtruded PVC, 9 mils  minimum average thickness, 8 mils minimum thickness at any point.
		
			AssemblyTwo to one hundred and fifty conductors laid parallel and in one plane. May use same or mixed AWG size. Minimum average and minimum at any point of insulation thickness after ripping shall be 9 mils and 8 mils, respectively. This forms a flat cable with a single row of conductors having a 1/2 in. maximum width web between insulated conductors.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22449	Issued:2022-10-24
			Revised:2022-10-23


Rating	105 deg C,600 Vac Horizontal flame; Oil Res 60,80 (optional).

Conductor	2-150, Nos. 32-16 AWG. Tinned or bare, solid or stranded copper, conductors laid parallel and in one plane. Same or mixed AWG.

Insulation	Extruded PVC, 9 mils minimum average thickness, 8 mils minimum thickness at any point.

Assembly	Two to one hundred and fifty conductors laid parallel and in one plane. May use same or mixed AWG size. Minimum average and minimum at any point of insulation thickness after ripping shall be 9 mils and 8 mils, respectively. This forms a flat cable with a single row of conductors having a 1/2 in. maximum width web between insulated conductors.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.