UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22452
                        
                            Issued:2022-11-01
                    
                            Revised:2022-10-31
                    
                            Style
                            22452
                        
                            Multi-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 60 Vac, Cable Flame Test
		
			Conductor50 AWG minimum, solid or stranded.
		
			InsulationLabeled or complies with manufacturer's Procedure with minimum rating 80 C, 60 V.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional. Extruded PVC, 13 mils minimum at any point or a helically or longitudinally applied PTFE tape of 1 mil nominal thickness (lap not specified).
		
			ShieldOptional. May be over one or more of the insulated conductors or applied over the assembly.
		
			JacketExtruded FRPE. Two or more jacketed cable laid parallel to form flat cables.
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			2.500 inch or less15 mils12 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22452	Issued:2022-11-01
			Revised:2022-10-31


Rating	80 deg C, 60 Vac, Cable Flame Test

Conductor	50 AWG minimum, solid or stranded.

Insulation	Labeled or complies with manufacturer's Procedure with minimum rating 80 C, 60 V.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional. Extruded PVC, 13 mils minimum at any point or a helically or longitudinally applied PTFE tape of 1 mil nominal thickness (lap not specified).

Shield	Optional. May be over one or more of the insulated conductors or applied over the assembly.

Jacket	Extruded FRPE. Two or more jacketed cable laid parallel to form flat cables.
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	2.500 inch or less	15 mils	12 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring in Class 2 Circuits only.