UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22453
                        
                            Issued:2022-11-08
                    
                            Revised:New
                    
                            Style
                            22453
                        
                            Multiple-conductor cable employing a non-extruded covering as the outermost layer
                    
			Rating80 deg C, 30 Vac, Horizontal flame.
		
			Conductor50 AWG minimum., material not specified.
		
			InsulationExtruded FEP, 4 mils minimum average thickness, 3 mils minimum thickness at any point.
		
			AssemblyTwo insulated singles or more, laid parallel in one plane, to form a flat ribbon type cable.
		
			CoveringInner Covering, Extruded PE or FEP, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			ShieldRequired. Metal tape with or without drain wire(s).
		
			CoveringOuter Covering, Wrap Polyester film with polyester adhesive, one or two sheets, each sheet is 0.5 mil min at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C, 30 Vac, Horizontal flame.

Conductor	50 AWG minimum., material not specified.

Insulation	Extruded FEP, 4 mils minimum average thickness, 3 mils minimum thickness at any point.

Assembly	Two insulated singles or more, laid parallel in one plane, to form a flat ribbon type cable.

Covering	Inner Covering, Extruded PE or FEP, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Shield	Required. Metal tape with or without drain wire(s).

Covering	Outer Covering, Wrap Polyester film with polyester adhesive, one or two sheets, each sheet is 0.5 mil min at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.