UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22458
                        
                            Issued:2023-02-17
                    
                            Revised:New
                    
                            Style
                            22458
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating90 deg C,-40 deg C,90 Vac Cable flame; Sunlight Res (required).
		
			Conductor50 AWG - 20 AWG, solid or stranded.
		
			InsulationExtruded FRPE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			AssemblyConsists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded PVC. See Facing Page for compound.
		
			Diameter of Core Assembly under jacket in inchesMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.000-0.4002419
		
			0.401-0.7003024
		
			0.701-1.5004536
		
			1.501-2.5006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	90 deg C,-40 deg C,90 Vac Cable flame; Sunlight Res (required).

Conductor	50 AWG - 20 AWG, solid or stranded.

Insulation	Extruded FRPE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Assembly	Consists of two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductors is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC. See Facing Page for compound.
	Diameter of Core Assembly under jacket in inches	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.000-0.400	24	19
	0.401-0.700	30	24
	0.701-1.500	45	36
	1.501-2.500	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.