UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22459
                        
                            Issued:2023-03-03
                    
                            Revised:2023-03-23
                    
                            Style
                            22459
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating80 deg C, 90 Vac Cable flame.
		
			Conductor50 AWG - 10 AWG, Solid or stranded.
		
			InsulationLabeled or complying with the manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated wires or groups or individually insulated wires forming a round, oval or flat cable. The length of lay of the twisted wires or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.
		
			ShieldOptional.
		
			JacketTPU
		
			Diameter of core assembly under jacket(inches)*Minimum average thickness(mils)Minimum thickness at any point(mils)
		
			0 - 2.5001512
		
			*Major diameter if cable is flat or oval.
		
			Outermost BraidOptional, Polyester.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal wiring in Class 2 circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22459	Issued:2023-03-03
			Revised:2023-03-23


Rating	80 deg C, 90 Vac Cable flame.

Conductor	50 AWG - 10 AWG, Solid or stranded.

Insulation	Labeled or complying with the manufacturer's AWM Procedure.

Assembly	Two or more individually insulated wires or groups or individually insulated wires forming a round, oval or flat cable. The length of lay of the twisted wires or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors.

Shield	Optional.

Jacket	TPU
	Diameter of core assembly under jacket(inches)*	Minimum average thickness(mils)	Minimum thickness at any point(mils)
	0 - 2.500	15	12
	*Major diameter if cable is flat or oval.

Outermost Braid	Optional, Polyester.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External wiring in Class 2 circuits.