UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22460
                        
                            Issued:2023-03-03
                    
                            Revised:2023-03-23
                    
                            Style
                            22460
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating80 deg C, 90 Vac Cable flame.
		
			Conductor50 AWG - 10 AWG, Solid or stranded.
		
			InsulationLabeled or complying with the manufacturer's AWM Procedure.
		
			AssemblyTwo or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.
		
			ShieldOptional.
		
			JacketTPU
		
			Diameter of core assembly under jacket(inches)*Minimum average thickness(mils)Minimum thickness at any point(mils)
		
			0 - 2.5001512
		
			*Major diameter if cable is flat or oval.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring in Class 2 Circuits only.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22460	Issued:2023-03-03
			Revised:2023-03-23


Rating	80 deg C, 90 Vac Cable flame.

Conductor	50 AWG - 10 AWG, Solid or stranded.

Insulation	Labeled or complying with the manufacturer's AWM Procedure.

Assembly	Two or more conductors, twisted pairs, or groups of twisted conductors. The conductors may be laid parallel or twisted together to form a flat, oval, or round cable construction. Barrier layer, tapes and/or fillers optional. May use same or mixed AWG sizes. Manufacturer shall maintain a complete description of each assembly.

Shield	Optional.

Jacket	TPU
	Diameter of core assembly under jacket(inches)*	Minimum average thickness(mils)	Minimum thickness at any point(mils)
	0 - 2.500	15	12
	*Major diameter if cable is flat or oval.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring in Class 2 Circuits only.