UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22461
                        
                            Issued:2023-03-13
                    
                            Revised:2023-03-15
                    
                            Style
                            22461
                        
                            Multiconductor Cable using Non-Integral Extruded Jacket
                    
			Rating80 deg C, 150 Vac, Cable Flame.
		
			Conductor36 AWG min., Solid or Stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPU.
		
			Diameter of core assembly under jacket inchMinimum average milsMinimum at any point mils
		
			0.700 or less3024
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			2.501-4.00011088
		
			4.001 and larger140112
		
			*Major dia if cable is flat or oval.
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22461	Issued:2023-03-13
			Revised:2023-03-15


Rating	80 deg C, 150 Vac, Cable Flame.

Conductor	36 AWG min., Solid or Stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid, paper, nylon, oriented polyethylene terephthalate, or thermoplastic-tape wrap. Such a barrier layer would serve to protect the cable during further processing and would be applied immediately over the twisted assembly of individual conductors or groups of conductors or over the shield, if provided.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPU.
	Diameter of core assembly under jacket inch	Minimum average mils	Minimum at any point mils
	0.700 or less	30	24
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64
	2.501-4.000	110	88
	4.001 and larger	140	112
	*Major dia if cable is flat or oval.

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.