UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22462
                        
                            Issued:2023-03-21
                    
                            Revised:2023-03-23
                    
                            Style
                            22462
                        
                            Multiple-Conductor Cable with Extruded Non-Integral Jacket
                    
			Rating80 deg C, 30 Vac, Horizontal Flame.
		
			Conductor40 AWG minimum solid or stranded
		
			InsulationLabeled or Complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May be use same or mixed AWG size.
		
			CoveringOptional - A 6 mil or heavier PVC covering may be extruded over the conductor assembly.
		
			JacketExtruded PVC
		
			diameter of cable under jacket in inchesmils minimum averagemils minimum at any point
		
			0.700 or less3024
		
			0.701-1.0006048
		
			1.001-1.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22462	Issued:2023-03-21
			Revised:2023-03-23


Rating	80 deg C, 30 Vac, Horizontal Flame.

Conductor	40 AWG minimum solid or stranded

Insulation	Labeled or Complying with manufacturer's AWM procedure.

Assembly	Two or more conductors, twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval or round cable. The lay of the conductor is not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May be use same or mixed AWG size.

Covering	Optional - A 6 mil or heavier PVC covering may be extruded over the conductor assembly.

Jacket	Extruded PVC
	diameter of cable under jacket in inches	mils minimum average	mils minimum at any point
	0.700 or less	30	24
	0.701-1.000	60	48
	1.001-1.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.