UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22468
                        
                            Issued:2023-05-11
                    
                            Revised:2023-05-22
                    
                            Style
                            22468
                        
                            Multiple-Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating105 deg C,1000 Vac Cable flame.
		
			Conductor30 AWG ~ 4/0 AWG, solid or stranded.
		
			InsulationLabeled or complying with Manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs, groups of twisted singles or singles or groups of singles laid parallel to form a flat, oval or round cable. Core wrap tape, binder, fillers and/or sensor are optional. Sensor consists of 2C heat sensitive polymer layer extruded over each phosphor-bronze wire or tinned copper clad steel wire, with core wrap tape, FEP inner covering and PVC outer covering, and lay of sensor is not specified. Not evaluated as a sensor.
		
			JacketExtruded PVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22468	Issued:2023-05-11
			Revised:2023-05-22


Rating	105 deg C,1000 Vac Cable flame.

Conductor	30 AWG ~ 4/0 AWG, solid or stranded.

Insulation	Labeled or complying with Manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs, groups of twisted singles or singles or groups of singles laid parallel to form a flat, oval or round cable. Core wrap tape, binder, fillers and/or sensor are optional. Sensor consists of 2C heat sensitive polymer layer extruded over each phosphor-bronze wire or tinned copper clad steel wire, with core wrap tape, FEP inner covering and PVC outer covering, and lay of sensor is not specified. Not evaluated as a sensor.

Jacket	Extruded PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.