UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22472
                        
                            Issued:2023-07-12
                    
                            Revised:New
                    
                            Style
                            22472
                        
                            Multiple Conductor Cable using Non-Integral Extruded Jacket
                    
			Rating105 deg C,-40 deg C,300 Vac, Cable flame, Sunlight Res (required).
		
			Conductor22 AWG to 2 AWG, solid or stranded.
		
			InsulationExtruded TPE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.
		
			AssemblyConsists of two D-shaped conductors and two round conductors. The conductors may be twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval, or round cable. The lay of the conductors is not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded TPE. See Facing Page for compound.
		
			Diameter of Core Assembly under jacket in inchesMinimum average thickness (mils)Minimum thickness at any point (mils)
		
			0.000-0.7003326
		
			0.701-1.0004536
		
			1.001-1.5006048
		
			1.501-2.5008064
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	105 deg C,-40 deg C,300 Vac, Cable flame, Sunlight Res (required).

Conductor	22 AWG to 2 AWG, solid or stranded.

Insulation	Extruded TPE, 5 mils minimum average thickness, 4 mils minimum thickness at any point.

Assembly	Consists of two D-shaped conductors and two round conductors. The conductors may be twisted pairs or groups of twisted conductors twisted together. The conductors or groups of conductors may be laid parallel forming a flat, oval, or round cable. The lay of the conductors is not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional.

Shield	Optional.

Jacket	Extruded TPE. See Facing Page for compound.
	Diameter of Core Assembly under jacket in inches	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0.000-0.700	33	26
	0.701-1.000	45	36
	1.001-1.500	60	48
	1.501-2.500	80	64

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.