UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22481
                        
                            Issued:2023-08-25
                    
                            Revised:2023-08-29
                    
                            Style
                            22481
                        
                            Multiconductor Cable with extruded non-integral jacket
                    
			Rating105 deg C,-40 deg C(Optional), 300 V, Sunlight Res (optional), Cable flame, VW-1, Horizontal Flame
		
			InsulationLabeled or Complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			ShieldOptional.
		
			CoveringOptional.
		
			JacketPVC
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			*Sunlight Resistant PVC Jackets will be subjected to 720 h Weatherometer Exposure (see Facing Page for jacket compound)
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22481	Issued:2023-08-25
			Revised:2023-08-29


Rating	105 deg C,-40 deg C(Optional), 300 V, Sunlight Res (optional), Cable flame, VW-1, Horizontal Flame

Insulation	Labeled or Complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Shield	Optional.

Covering	Optional.

Jacket	PVC
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	*Sunlight Resistant PVC Jackets will be subjected to 720 h Weatherometer Exposure (see Facing Page for jacket compound)

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.