UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22484
                        
                            Issued:2023-09-15
                    
                            Revised:2023-09-18
                    
                            Style
                            22484
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C, 30 Vac, Horizontal Flame.
		
			Conductor50 AWG minimum, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyTwo or more twisted singles or groups of twisted singles twisted together or two or more conductors or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.
		
			CoveringOptional, Extruded PVC, 13 mil minimum at any point or extruded TPE, 6 mil minimum at any point.
		
			ShieldOptional.
		
			JacketExtruded TPU
		
			Diameter of cable under jacket in inchesminimum average thickness in milsminimum thickness at any point in mils
		
			0.300 or less1512
		
			0.301-0.4502217
		
			0.451-0.5503024
		
			0.551-0.8006048
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring in Class 2 Circuits.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22484	Issued:2023-09-15
			Revised:2023-09-18


Rating	105 deg C, 30 Vac, Horizontal Flame.

Conductor	50 AWG minimum, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Two or more twisted singles or groups of twisted singles twisted together or two or more conductors or groups may be laid parallel to form flat, oval, or round cables. May use same or mixed AWG. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly.

Covering	Optional, Extruded PVC, 13 mil minimum at any point or extruded TPE, 6 mil minimum at any point.

Shield	Optional.

Jacket	Extruded TPU
	Diameter of cable under jacket in inches	minimum average thickness in mils	minimum thickness at any point in mils
	0.300 or less	15	12
	0.301-0.450	22	17
	0.451-0.550	30	24
	0.551-0.800	60	48

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring in Class 2 Circuits.