UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22486
                        
                            Issued:2023-09-21
                    
                            Revised:2023-10-16
                    
                            Style
                            22486
                        
                            Multiconductor Cable with Non-extruded Covering
                    
			Rating105 deg C,30 Vac Horizontal flame, VW-1 flame.
		
			InsulationLabeled or complying with manufacturer's AWM procedure.
		
			AssemblyConsists of two or more singles, twisted pairs or groups of twisted singles twisted together.  The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			Outer CoveringRequired. Two layers, Non-extruded PET tape with Polyester Adhesive, thickness 1 mil minimum average, 0.5 mil minimum at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22486	Issued:2023-09-21
			Revised:2023-10-16


Rating	105 deg C,30 Vac Horizontal flame, VW-1 flame.

Insulation	Labeled or complying with manufacturer's AWM procedure.

Assembly	Consists of two or more singles, twisted pairs or groups of twisted singles twisted together. The singles or groups of singles may be laid parallel forming a flat, oval or round cable. The lay of the conductors are not specified. A barrier layer and/or fillers are optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Outer Covering	Required. Two layers, Non-extruded PET tape with Polyester Adhesive, thickness 1 mil minimum average, 0.5 mil minimum at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.