|
| Rating | 80 deg C, 30 Vac, Cable flame. |
|
| Conductor | 36 AWG - 6 AWG, solid or stranded. |
|
| Insulation | Labeled or complying with manufacturer's AWM Procedure. The designations of all styles of individual conductors used in making up the cable assembly shall be available. |
|
| Assembly | Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with no more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or a thermoplastic- tape wrap. Such a barrier layer would serve to protect the cable during further processing, and would be applied immediately over the twisted assembly or individual conductors or groups of conductors. |
|
| Shield | Optional. |
|
| Covering | Optional. A 6 mil, or heavier, Extruded PVC covering may be extruded over the conductor assembly. |
|
| Jacket | Extruded PVC |
| Diameter of core assembly under jacket | Minimum average thickness | Minimum thickness at any point | 0.700 inch or less | 20 mils | 16 mils | 0.701-1.000 inch | 30 mils | 24 mils | 1.001-1.500 inch | 40 mils | 32 mils | 1.501-2.500 inch | 50 mils | 40 mils | 2.501 inch or larger | 65 mils | 52 mils |
| * Major diameter if cable is flat or oval. |
|
| Standard | Appliance Wiring Material UL 758. |
|
| Marking | General. |
|
| Use | External Wiring of Class 2 Circuits in Electronic Equipment. |
|