UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22496
                        
                            Issued:2024-01-09
                    
                            Revised:2024-01-07
                    
                            Style
                            22496
                        
                            Multiple-conductor cable using non-integral jacket
                    
			Rating105 deg C,300 Vac; Cable Flame; VW-1 flame; Horizontal flame; Oil Res 60 (optional); Sunlight Res (optional).
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			CoveringOptional.
		
			ShieldOptional.
		
			JacketExtruded PVC, For Sunlight Res Rating material shall be Any Recognized Component (QMTT2) 720 hours sunlight Resistance PVC Compound or see Facing page for compound.
		
			Diameter of core assembly under jacket(inch)Minimum average thickness (mils)Minimum thickness at any point (mils)
		
			0 - 0.7003024
		
			0.701 - 1.0004536
		
			1.001 - 1.5006548
		
			1.501 - 2.5008064
		
			BraidOptional.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseExternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2024

Subj.758	Section 2	Page 22496	Issued:2024-01-09
			Revised:2024-01-07


Rating	105 deg C,300 Vac; Cable Flame; VW-1 flame; Horizontal flame; Oil Res 60 (optional); Sunlight Res (optional).

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Covering	Optional.

Shield	Optional.

Jacket	Extruded PVC, For Sunlight Res Rating material shall be Any Recognized Component (QMTT2) 720 hours sunlight Resistance PVC Compound or see Facing page for compound.
	Diameter of core assembly under jacket(inch)	Minimum average thickness (mils)	Minimum thickness at any point (mils)
	0 - 0.700	30	24
	0.701 - 1.000	45	36
	1.001 - 1.500	65	48
	1.501 - 2.500	80	64

Braid	Optional.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	External Wiring.