UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22498
                        
                            Issued:2024-01-29
                    
                            Revised:2024-01-31
                    
                            Style
                            22498
                        
                            Multiconductor with non-extruded covering 
                    
			Rating80 deg C,30 Vac, Horizontal flame.
		
			Conductor30 AWG - 10 AWG, solid or stranded, metal-coated.
		
			InsulationExtruded FEP with 8 mils minimum average thickness and 7 mils minimum thickness at any point.
		
			AssemblyTwo (2) insulated conductors twisted together or laid parallel with optional inner covering, a shield, two (2) drain wires and overall non-extruded polyester tape.
		
			Inner CoveringOtional - Extruded PE covering may be provided over the insulated conductor pair, with 8 mils maximimum thickness.
		
			ShieldAn Aluminum/Polypropylene shield shall be provided under the outer covering.
		
			Outer CoveringNon-Extruded Polyester tape with 0.8 mils minimum thickness provided over the shield.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22498	Issued:2024-01-29
			Revised:2024-01-31


Rating	80 deg C,30 Vac, Horizontal flame.

Conductor	30 AWG - 10 AWG, solid or stranded, metal-coated.

Insulation	Extruded FEP with 8 mils minimum average thickness and 7 mils minimum thickness at any point.

Assembly	Two (2) insulated conductors twisted together or laid parallel with optional inner covering, a shield, two (2) drain wires and overall non-extruded polyester tape.

Inner Covering	Otional - Extruded PE covering may be provided over the insulated conductor pair, with 8 mils maximimum thickness.

Shield	An Aluminum/Polypropylene shield shall be provided under the outer covering.

Outer Covering	Non-Extruded Polyester tape with 0.8 mils minimum thickness provided over the shield.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.