UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22517
                        
                            Issued:2024-06-13
                    
                            Revised:New
                    
                            Style
                            22517
                        
                            Multiple Conductor Cable using non-extruded covering
                    
			Rating80 deg C,30 Vac Horizontal flame.
		
			Conductor36 AWG - 22 AWG, solid or stranded.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo insulated conductors laid parallel, with PTFE tape wrap, shields and overall covering.
		
			Inner CoveringNon extruded PTFE tape provided in one or more layers.
		
			ShieldOne or more metal shields shall be provided over the PTFE tape.  Drain wires may be employed.
		
			Outer CoveringNon-extruded heat sealed Polyester Tape -  1.0 mils minimum thickness.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025


Rating	80 deg C,30 Vac Horizontal flame.

Conductor	36 AWG - 22 AWG, solid or stranded.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two insulated conductors laid parallel, with PTFE tape wrap, shields and overall covering.

Inner Covering	Non extruded PTFE tape provided in one or more layers.

Shield	One or more metal shields shall be provided over the PTFE tape. Drain wires may be employed.

Outer Covering	Non-extruded heat sealed Polyester Tape - 1.0 mils minimum thickness.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.