UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22532
                        
                            Issued:2024-08-06
                    
                            Revised:2024-08-13
                    
                            Style
                            22532
                        
                            Jacketed Cable.
                    
			Rating90 deg C, voltage rating not specified, Horizontal Flame.
		
			Conductor36 AWG minimum, solid or stranded round.
		
			InsulationLabeled or complying Manufacturer's AWM Procedure.
		
			AssemblyTwo or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermo-plastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.
		
			ShieldOptional.
		
			CoveringOptional. A 4 mil or heavier wall of thermoplastic covering may be extruded over the conductor assembly or groups of conductors (with or without shields).
		
			JacketExtruded TPU
		
			major dia in inches
		
			0.700 or less60 mils min average48 mils minimum at any point
		
			0.701-1.500 in80 avg64 min
		
			1.501-2.500 in110 avg88 min
		
			2.501 in and larger140 avg112 min
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseSpecial - External Wiring with Horizontal Flame Rating.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22532	Issued:2024-08-06
			Revised:2024-08-13


Rating	90 deg C, voltage rating not specified, Horizontal Flame.

Conductor	36 AWG minimum, solid or stranded round.

Insulation	Labeled or complying Manufacturer's AWM Procedure.

Assembly	Two or more individually insulated conductors or groups of insulated conductors cabled together to form a round cable. A flat or oval cable may also be constructed with not more than three rows of single conductors or groups of conductors. The length of lay of the twisted conductors or groups is not specified. Fillers may be used in a cable but are not required. A barrier layer, if employed, may be a fibrous wrap serving, or braid; paper; nylon; oriented polyethylene terephthalate; or thermo-plastic tape wrap. The barrier layer may be applied over the twisted assembly of individual conductors, groups of conductors or individual conductors or over the shield, if provided.

Shield	Optional.

Covering	Optional. A 4 mil or heavier wall of thermoplastic covering may be extruded over the conductor assembly or groups of conductors (with or without shields).

Jacket	Extruded TPU
	major dia in inches
	0.700 or less	60 mils min average	48 mils minimum at any point
	0.701-1.500 in	80 avg	64 min
	1.501-2.500 in	110 avg	88 min
	2.501 in and larger	140 avg	112 min

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Special - External Wiring with Horizontal Flame Rating.