UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22543
                        
                            Issued:2024-08-30
                    
                            Revised:2024-12-16
                    
                            Style
                            22543
                        
                            Multiple-Conductor with non-extruded coverings
                    
			Rating105 deg C,30 Vac, Horizontal flame, VW-1.
		
			Conductor30 AWG - 20 AWG, Solid or Stranded
		
			AssemblyTwo (2) insulated conductors twisted or laid parallel with inner covering, shield and outer covering, all as described below.
		
			InsulationExtruded FEP with minimum average thickness 4 mils, minimum thickness at any point 3.5 mils.
		
			Inner CoveringNon-extruded PTFE tape with 2 mils minimum thickness provided over the pair of insulated conductors.
		
			ShieldAn Al/PP, AL/PET, Cu/PP, or Cu/PET shield with 2 mils minimum thickness shall be provided over the inner covering.
		
			Outer CoveringTwo Non-Extruded Polyimide Kapton Tapes with EVA adhesive, provided over the shield.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22543	Issued:2024-08-30
			Revised:2024-12-16


Rating	105 deg C,30 Vac, Horizontal flame, VW-1.

Conductor	30 AWG - 20 AWG, Solid or Stranded

Assembly	Two (2) insulated conductors twisted or laid parallel with inner covering, shield and outer covering, all as described below.

Insulation	Extruded FEP with minimum average thickness 4 mils, minimum thickness at any point 3.5 mils.

Inner Covering	Non-extruded PTFE tape with 2 mils minimum thickness provided over the pair of insulated conductors.

Shield	An Al/PP, AL/PET, Cu/PP, or Cu/PET shield with 2 mils minimum thickness shall be provided over the inner covering.

Outer Covering	Two Non-Extruded Polyimide Kapton Tapes with EVA adhesive, provided over the shield.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.