UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22546
                        
                            Issued:2024-09-18
                    
                            Revised:2024-09-26
                    
                            Style
                            22546
                        
                            Multi-Conductor Cable with Non-extruded Covering
                    
			Rating80 deg C,30 Vac Horizontal flame.
		
			InsulationLabeled or complying with manufacturer's AWM Procedure.
		
			AssemblyTwo or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.
		
			Inner CoveringOptional.
		
			ShieldRequired.
		
			CoveringOptional.
		
			Outer CoveringRequired, One or Two layers, Non-extruded PI tape with EVA adhesive, 1 mil minimum average thickness, 0.8 mil minimum thickness at any point.
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22546	Issued:2024-09-18
			Revised:2024-09-26


Rating	80 deg C,30 Vac Horizontal flame.

Insulation	Labeled or complying with manufacturer's AWM Procedure.

Assembly	Two or more singles, twisted pairs of groups of twisted singles twisted together or singles or groups of singles may be laid parallel to form flat, oval or round cable. Lay not specified. Barrier layer and/or fillers optional. Manufacturer shall maintain a complete description of each assembly. May use same or mixed AWG size.

Inner Covering	Optional.

Shield	Required.

Covering	Optional.

Outer Covering	Required, One or Two layers, Non-extruded PI tape with EVA adhesive, 1 mil minimum average thickness, 0.8 mil minimum thickness at any point.

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.