UL iQ™ for Appliance Wiring Materials

	
                            APPLIANCE WIRING MATERIAL
                        
                            Subj.758
                        
                            Section
                            2
                        
                            Page
                            22547
                        
                            Issued:2024-10-01
                    
                            Revised:2024-10-02
                    
                            Style
                            22547
                        
                            Multiple-conductor cable using non-integral jacket.
                    
			Rating90 deg C, 1000 Vac, Horizontal Flame.
		
			Conductor40 AWG min. solid or stranded round.
		
			InsulationLabeled or complies with manufacturer's Singles AWM Procedure rated 90 deg C min and a voltage rating equaling or exceeding the rating of the cable.
		
			AssemblyTwo or more singles or groups of twisted singles twisted together. Lay not specified. Barrier layer, shield, braid and/or fillers optional.
		
			JacketExtruded TPU -
		
			Diameter of core assembly under jacketMinimum average thicknessMinimum thickness at any point
		
			0.700 inch or less30 mils24 mils
		
			0.701-1.000 inch45 mils36 mils
		
			1.001-1.500 inch60 mils48 mils
		
			1.501-2.500 inch80 mils64 mils
		
			2.501-4.500 inch110 mils88 mils
		
			StandardAppliance Wiring Material UL 758.
		
			MarkingGeneral.
		
			UseInternal Wiring.
		
                UL and the UL Logo are trademarks of UL LLC © 2025

Subj.758	Section 2	Page 22547	Issued:2024-10-01
			Revised:2024-10-02


Rating	90 deg C, 1000 Vac, Horizontal Flame.

Conductor	40 AWG min. solid or stranded round.

Insulation	Labeled or complies with manufacturer's Singles AWM Procedure rated 90 deg C min and a voltage rating equaling or exceeding the rating of the cable.

Assembly	Two or more singles or groups of twisted singles twisted together. Lay not specified. Barrier layer, shield, braid and/or fillers optional.

Jacket	Extruded TPU -
	Diameter of core assembly under jacket	Minimum average thickness	Minimum thickness at any point
	0.700 inch or less	30 mils	24 mils
	0.701-1.000 inch	45 mils	36 mils
	1.001-1.500 inch	60 mils	48 mils
	1.501-2.500 inch	80 mils	64 mils
	2.501-4.500 inch	110 mils	88 mils

Standard	Appliance Wiring Material UL 758.

Marking	General.

Use	Internal Wiring.